Camstage Masking Controller (2 Stop)

Camstage Masking Controller (2 Stop)

This product is the Camstage 2 Stop Masking Controller. This unit has a 8.9m travel and is a general all purpose single or double line winding unit. The unit can be used to control side moving masking, top, bottom, or combination top and bottom moving masking systems for the cinema industry. This unit can also be used in a variety of ways including curtain controlling.

The limits should never be exceeded. The building support structure must be of similar or greater load bearing capacity. After installation the complete unit must be inspected and tested in line with the local and national regulations. Fasteners are not supplied unless specified. The controller must be mounted on a flat horizontal or a flat vertical surface with drum access horizontal. The controller provides a long and troubled free service but should be regularly checked to make sure no deformation has occurred.

Features Include:

Construction

• Type: Powder Coated Steel Work Chassis
• Mounting: Supplied with four mounting holes
• Dimensions: 315mm (h) x 400mm (w) x 445mm (d)

Motor

• Type: Lenze MDC71C4 motor (further information is available on request)
• Operation: 230v Single Phase, 1/2 hp, 1380 rpm