CamStyle Wet Room Eco Hanging Panels

The innovative CamStyle™ Wet Room Eco Hanging Panel system represents a revolution in industrial noise absorption. CamStyle™ absorbers are hung in rows on steel cables, which are suspended horizontally between two walls. 

The suspended noise absorbers are constructed of open-cell melamine resin-based foam. The foam exhibits special qualities such as an intricate three-dimensional web structure composed of thin strands which make the material easy to form. These qualities result in a material that possesses excellent absorption characteristics for optimal noise reduction.

Its low weight and easy installation means the panel can be used in a variety of situations and adapted to suit various construction requirements. Tests performed by DOEMENS, the beverage industry's inspection and monitoring unit, demonstrate that the CamStyle™ wet room absorber is excellently suited for application in the beverage industry.

Cleaning of the absorbers may be conducted using high pressure water jet. 

 The absorbers are strung onto the steel cables from the wall outwards, so there is no need  for scaffolding during installation.

Product Advantages:

• Optimal noise reduction
• Low weight saves shipping costs
• Cost-saving solution with an efficient installation system - no scaffolding needed
• Reduced replacement costs due to easy dismantling
• Environmentally safe - free of synthetic and natural mineral fibre, halogens and CFCs
• Excellent sound absorption values over a wide range of frequencies
• High degree of light reflectivity
• Negligible structural influence due to low weight
• Easy to clean using high-pressure water jet
• Demonstrated safety for use in the beverage and foodstuff industries: DOEMENS certified

Building Material Classification

• Fire rating is Class 0 in accordance with BS476.
• The material is available to fulfil especially stringent building material classification requirements. The panel is a soft melamine resin-based foam.

Properties

• Free of synthetic and natural mineral fibre, halogens and CFCs
• High degree of thermal resistance
• Very lo- volume weight
• High degree of resistance to ageing open-cell

Colours

The CamStyle™ Wet Room Eco Hanging Panel's core material is white. Other colour coating options are available for orders exceeding 100 units. Prior colour sampling is required. Variations in colour cannot be completely excluded.

Disposal

• May be disposed of as household waste
• European waste disposal classification is EAK Nr. 120 105 

Installation

The sub-construction consists of main support tracks which are hung from the ceiling parallel to each other at an axial distance of 1200mm, using easy-to-adjust suspension brackets.

A cross section T track profile (length 1200mm) is snapped into the main support tracks at the desired distance from each other (depending on the configuration and number of absorbers to be installed).

The CamStyle™ Wet Room Absorbers are hung from the cross section tracks using conventional caddy clips or 's' hooks.

The anchoring turn-buckle bolt on both ends of the cables are attached to the desired anchoring system (right angle bracket, eyelet screw, Halfen anchor) at the calculated row spacing position and height.

The steel cable is attached to one side complete with the CamStyle™ cable eye stiffener and cable leading using the CamStyle™ lead-sealing pliers. An additional suspension bolt is recommended for cable lengths exceeding 10 metres.

The cables are suspended at the calculated mean centre distance between the rows.

The unattached ends of the steel cable are then equipped with the turn-buckle suspension bolt and the cable eye stiffener and the cable leading is attached, as described in step 2. The turn-buckle bolt is then attached to the wall mount and tightened.

The ECO absorbers, with factory mounted corkscrew suspension eyelet hooks, are hung from the cable. The CamStyle™ E spacer units are clipped onto the cable between the absorbers. The absorbers and spacers are then manually slid down the cable. The procedure is repeated until the calculated number of absorbers per cable has been strung.

The suspension turn-buckle bolt is then re-tightened to minimise sagging in the cable. In some cases where the cable length requires, an additional support anchor may be required. We recommend using an easy to adjust suspension brace with hook.

• CamStyle™ cable eye stiffener, galvanised, with CAMSTYLE cable leading, aluminium, galvanised.
• CamStyle™ suspension turn-buckle bolt, galvanised.
• CamStyle™ steel cable, galvanised,2.5mm diameter.
• CamStyle™corkscrew-type suspension eyelet hooks, galvanised.
• CamStyle™ spacer, 300mm standard length.
•  CamStyle™' hook.