GEBUWIN | WW Type 250kg - 1500kg GR/2D Double Drum Worm gear hand winch (WG Type)

This Gebuwin worm gear hand winch has a double cable drum and a transmission that consists of a worm shaft and wheel. Due to the fact that this transmission causes friction loss it also provides 50% of the braking system. The load pressure brake provides the other 50%. The combination of the braking system and robust design results in a very safe hoisting and pulling winch. Gebuwin provides special versions of up to six cable drum compartments.

• • Robust construction
• • Primarily used for hoisting, also possible for pulling loads
• • The braking mechanism consists of 50% by the friction in the worm gear transmission and 50% by a load pressure brake
• • Static safety minimum factor 4
• • Adjustable crank and recoil free
• • All rotating parts run in maintenance free bearings
• • The numbers in the product name correspond with the hoisting capacities on the first cable layer. Pulling capacity is approx. 2.5 times the hoisting capacity
• • Cable outlet possible upward, downward and at rear.
• • Standard paint finish in grey (RAL 7035) and black (RAL 9005) according to DIN 12944, C1M

1. GD = Grooved cable drum
2. EV = Zinc plated finish with a minimum of 6 micron
3. EX = ATEX certified, for zones 2 and 22
4. XD = Multiple (X) cable compartments possible